Yamaha HS80M 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Yamaha HS80M에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha HS80M 17 페이지. Hs series powered monitor speaker
Yamaha HS80M에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지), 서비스 매뉴얼 (27 페이지)

페이지 인쇄

Fine-tuning for Stereo

The speaker LEVEL controls should be set to the same level. A setting of about 12 o'clock corresponds to a nominal

input level of about +4 dB.

Since no subwoofer is being used in this setup, set the LOW CUT switch to "FLAT".

When set to "-2 dB" the EQ MID switch attenuates the midrange frequencies slightly to produce a somewhat "softer"

sound that may be better for listening or long monitoring sessions. For accurate monitoring, however, set the MID

switch to "0".

Set the ROOM CONTROL switch according to the distance your speakers are placed from the nearest wall (refer to

"Proximity to Walls and Corners", above).

For accurate monitoring set the HIGH TRIM switch to "0". This switch can be set to "-2 dB" to attenuate the highs

slightly if you ﬁnd the sound too bright.

HS80M/HS50M/HS10W Owner's Manual

The "Sweet Spot"

60˚

For both stereo and surround mixing

your position in relation to the main front

speakers — the "sweet spot" as it's often

called — should be one apex of an

equilateral triangle. In other words your

distance from either speaker should be the

same as the distance between the two

speakers. The speakers should also be

"toed in" to the corresponding 60° angle

so that the drivers are aimed directly at the

listening position. The height of the

speakers should be such that the tweeters

are roughly aligned with your ears (this is

because high frequencies are the most

directional).