Clark GP127 서비스 매뉴얼 - 페이지 11

{카테고리_이름} Clark GP127에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clark GP127 13 페이지.

Group 26, Power Steering System

3. Carefully put the cylinder ends in position on the

cylinder making sure the seals are in place and that the

caps are in the identical positon they were

disassembly.

before

4. Insert the tie rods in the cylinder and tighten the

nuts to a torque of [70-80 N.m] 52-59 Ibf.ft.

5. Check the correct positioning of parts and make

sure the cylinder rod moves freely in the cylinder.

6. Put thecylinder in position in the axle frame (making

sure the locator pin is in correct position) and insert the

four fasteners attaching it to the frame.

Tighten the fast,eners to a torque of [70-80 N.m] 52-59

Ibfft.

7. Position a new seal and the upper bearing cone on

the steering knuckle upper trunnion.

Insert this assembly in the steer axle and install the

lower new seal and bearing cone and then the

knuckle pin cover and bearing assembly.

SM 619, Jan '98

System-Steer Axle

26-I-7