Ecoplus 727186 설치 및 유지보수 지침 - 페이지 7
{카테고리_이름} Ecoplus 727186에 대한 설치 및 유지보수 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ecoplus 727186 12 페이지. Commercial grade, automatic submersible pump
7. START-UP
1) Insert the plug of the power cable in a 115 – 120V power socket.
2) When the float reaches the ON level, the pump will start and will continue operating
until it reaches the OFF level.
Automatic operation (A):
3) The integrated float switch starts and stops the pump automatically when the
indicator (2) is positioned on "A".
Manual operation (M):
4) To start the pump, lift the knob (3) position indicator (2) on "M". In these conditions the
suction level of the pump will be down to 0.08"-0.12" ( 2-3 mm).
5) In order to check the performance and/or clean the float switch, open the cover (1)
position the knob (3) to "O".
8. PRECAUTIONS
RISK OF FREEZING: when the pump remains inactive at a temperature lower than 32º F, it
is necessary to ensure that there is no water residue which could freeze causing cracks in the
plastic parts. If the pump has been used with substances that tend to form deposits, or with
water containing chlorine, rinse after use with a powerful water jet in order to avoid the
formation of deposits or coatings which would reduce the performance of the pump.
Automatic operation (A)
Manual operation (M)
7