Directechs DB3 사용 설명서 - 페이지 9
{카테고리_이름} Directechs DB3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Directechs DB3 17 페이지. 2011 subaru outback - 403.subaru2 1.25
Directechs DB3에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (10 페이지)
페이지 인쇄
Module programming
Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.
For
Convenience-Only
programming, see next section.
1
Ensure vehicle is in a safe location and cannot move forward during programming.
The harnesses must be connected in this exact order:
1.
Connect the 14-pin.
2
2.
Connect the 12-pin.
Connect the 10-pin.
3.
When the LED turns on solid red, proceed with the next step.
Do not depress the Brake pedal.
3
Press the Push-To-Start (PTS) button twice (2x) to turn the ignition ON.
The LED flashes green.
Wait for the bypass to program (it may flash for up to 30 seconds).
4
The LED will turn ON solid green for 3 seconds, then shuts OFF.
5
Press the PTS button one time (1x) more to turn the ignition OFF.
You have successfully completed the module programming sequence.
9
403.MA3 2.42.104 2014 Mazda 3 (Smart Key)
©2023 Directed. All rights