Directechs DIRECTED DB3 403.FORD18 사용 설명서 - 페이지 12

{카테고리_이름} Directechs DIRECTED DB3 403.FORD18에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Directechs DIRECTED DB3 403.FORD18 20 페이지.

Connecting the module

Important!

Make all the required connections to the vehicle, as described in this guide, and double check to ensure everything is correct prior

to moving onto programming.

Note: Before connecting either the XL202 or SmartStart module to DB3, it is important to ensure that the proper feature and

function programming is selected using DirectLink (version 4.5 or higher). Visit www.directechs.com to download the latest version

of the application.

Warning!

To take advantage of advanced features, you must use DirectLink 4.5 (and higher) or the Directechs Mobile application.

Flashing a module using your computer:

1. Connect the interface module to your computer using the XKLoader2.

2. Go to www.directechs.com using Internet Explorer, and select the Flash Module button.

3. Follow the instructions to select your vehicle, installation type, and configure your options.

4. Once you have configured the firmware options, click on the FLASH button.

Flashing a module using your smartphone or tablet:

1. Connect the interface module to your XKLoader3.

2. Launch the Directechs Mobile app on your smartphone or tablet.

3. Select FLASH YOUR MODULE and follow the on screen instructions.

When the flashing operation is successful, you can proceed with the instructions below.

SmartStart installation

The DB3 module must be disconnected from any power source before SmartStart can

be connected to it. Failing to do so could damage DB3.

1. To ensure that the D2D communication between SmartStart and DB3 works properly,

connect the Gray wire to a ground source (Rev B SmartStart), and cut the Brown or

Blue loop (Rev A SmartStart).

2. Do NOT connect the 2-pin harness (on SmartStart). Power and ground will be

provided by the DB3 D2D connector.

3. Connect SmartStart to DB3 using the D2D port.

XL202 installation

Connect XL202 to DB3 using the D2D port.

403.FORD18 1.06 2021 Lincoln Nautilus (Smart Key)

D2D