Yamaha YSP-4100 빠른 참조 매뉴얼 - 페이지 5

{카테고리_이름} Yamaha YSP-4100에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YSP-4100 9 페이지. Quick reference guide
Yamaha YSP-4100에 대해서도 마찬가지입니다: 추가 정보 (2 페이지)

페이지 인쇄
Yamaha YSP-4100 빠른 참조 매뉴얼
Carrying out the AUTO SETUP (IntelliBeam)
4
Carry out the AUTO SETUP to adjust the settings so that the best listening
environment is created.
The IntelliBeam technology allows you to achieve sound adjustments that best match your listening environment. It is normal for loud test tones to be output during the
AUTO SETUP procedure. Make sure that there are no children around in the listening room while the AUTO SETUP procedure is in progress.
1
Connect the supplied IntelliBeam microphone to the INTELLIBEAM MIC
jack on the front panel.
If necessary, use the supplied cardboard microphone stand. Assemble the stand and place the IntelliBeam microphone on top of it
horizontally as shown below.
IntelliBeam microphone (supplied)
Cardboard microphone stand (supplied)
2
Set the IntelliBeam microphone at your normal listening position.
Use the supplied cardboard microphone stand or a tripod to place the IntelliBeam microphone at the same height as your ears would be
when you are seated.
IntelliBeam microphone
Center height of
this unit
Cardboard microphone stand
1.8 m (6.0 ft)
or more
3
Press the Power ( ) key on the
remote control.
The power of this unit turns on.
If a subwoofer with adjustable volume and crossover
frequency controls is connected to this unit, turn it on, set
the volume to about half way and then set the crossover
frequency to the maximum as shown below.
TV
AV
TV
AUX 1
HDMI 1
HDMI 2
INPUT
VOLUME
INTELLIBEAM MIC
INTELLIBEAM MIC
Upper limit
Within 1 m (3.3 ft)
Within 1 m (3.3 ft)
Listening
position
Lower limit
Subwoofer
CROSSOVER/
VOLUME
HIGH CUT
AUX 2
MIN
MAX
MIN
HDMI 3
1
2
Center line
IntelliBeam
Cardboard
microphone
microphone
stand
4
Turn on the power of your TV
and select this unit as the video
input on your TV.
If this unit is connected to the HDMI input on the TV (as
shown in "Example - A"), switch the video input to "HDMI".
If this unit is connected to the video input 1 on the TV (as
shown in "Example - B"), switch the video input to "1".
MAX
– –
3
4
Place the IntelliBeam microphone on the
extended center line of this unit and 1.8 m
(6.0 ft) or more away from it. Also, make
sure place the IntelliBeam microphone
within 1 m (3.3 ft) upper or lower from the
center height of this unit.
5