Yamaha YST-MS55D 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Yamaha YST-MS55D에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YST-MS55D 15 페이지. Powered multimedia speakers
Yamaha YST-MS55D에 대해서도 마찬가지입니다: 서비스 매뉴얼 (34 페이지)

페이지 인쇄

Installing the software

Microsoft Windows 98/98SE or Windows Me

Installing and checking the USB driver

1. Turn on your computer and, if it's not running

already, start Windows 98/98SE or Windows

Me.

2. Connect the power cord to a suitable AC outlet.

This unit can be on or in standby mode when

installing the driver.

3. Connect this unit to a USB port on the com-

puter using the supplied USB cable.

Windows automatically detects this unit and

installs the necessary driver software. Make opera-

tions as indicated in the dialog box. You may be

requested to insert your Windows OS CD-ROM.

* The installation may take a longer time depend-

ing on the system environment. After the instal-

lation dialog box disappears, wait several

minutes.

Check that the USB driver has been installed success-

fully by following the procedure below.

4. Click the Windows "Start" button and select

"Settings", and then "Control Panel".

The Control Panel window appears.

5. Double-click the "System" icon.

The System Properties window appears.

6. Click the "Device Manager" tab.

The Device Manager window appears.

7. Click the "View devices by type" option button.

8. Click the "+" symbol next to "Sound, video and

game controllers," and make sure that "USB

Audio Device" appears in the list, as shown.

* The screen image is for Windows 98SE.

* When using Windows Me, "?" may be shown at

the head of "USB Copmposite Device" in green.

This means the USB driver has been installed

with the Generic ID supplied with the operating

system. (This is not an error message.)

E-

9. Click the "+" symbol next to "Human Interface

Devices", and make sure that "HID-compliant

consumer control device" and "USB Human

Interface Device" appear in the list, as shown.

* The screen image is for Windows 98SE.

10. Click the "+" symbol next to "Universal Serial

Bus controllers" and make sure that "USB

Composite Device" appears in the list, as

shown.

* The screen image is for Windows 98SE.

Note:

• The device list on your computer may differ to that

shown here.

• If "!" or "?" is shown at the head of the device

name, check the followings:

* The USB cable is ﬁrmly connected.

* The AC power cord of this unit is plugged into

an AC outlet.

• If the driver has not been successfully installed,

disconnect the USB cable and connect it again.

Then try to install the driver again. If installation

still fails, restart Windows and try again.