Yamaha YVC-1000 사용자 설명서 - 페이지 22

{카테고리_이름} Yamaha YVC-1000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YVC-1000 37 페이지. Microphone & speaker system
Yamaha YVC-1000에 대해서도 마찬가지입니다: 사용자 설명서 (45 페이지), 사용자 설명서 (16 페이지), 테스트 매뉴얼 (2 페이지)

페이지 인쇄
Yamaha YVC-1000 사용자 설명서
■
Pairing and Bluetooth connection using the NFC function
(for NFC-compatible model)
If the smartphone satisfies the following conditions (hereinafter, referred to as an "NFC-compatible model"), pairing
and Bluetooth connection operations can be performed easily.
• NFC-compatible Android devices, versions 4.1, 4.2, 4.3 and 4.4
Before starting this procedure, turn the NFC function on in the smartphone.
Note
This function may not work or the connectable distance may be different depending on smartphones.
y
• If the smartphone is covered with a case, remove the case.
• If pairing or Bluetooth connection has failed, change the position of where to pass the smartphone over the product.
NFC logo
■
Terminating a Bluetooth connection
If one of the following operations is performed while a Bluetooth connection is made, a Bluetooth connection is
terminated.
• Press the Bluetooth button (
• Perform the Bluetooth disconnection procedure on the smartphone.
• Pass the smartphone over the NFC logo of the product (for an NFC-compatible model).
When a Bluetooth connection is terminated, the Bluetooth button (
Also, the voice guidance notifies the user that a Bluetooth connection has been terminated.
y
When the product is placed into the standby mode, a Bluetooth connection is also terminated.
21
).
1
Press the power button (
the product on.
When the power is turned on, all the buttons light up
green.
2
Press the Bluetooth button (
The Bluetooth button (
Bluetooth connection is enabled.
3
Pass the smartphone over the NFC
logo of the product.
When the connection is completed, the button lights
up blue.
Also, the voice guidance notifies the user that a
Bluetooth connection has succeeded.
y
If the Bluetooth button (
button (
) is flashing blue or if 90 seconds has elapsed
while a Bluetooth connection remains uncompleted, the
Bluetooth enable status is canceled.
) lights up green.
) to turn
).
) flashes blue, and the
) is pressed while the Bluetooth