Yamaha YVC-1000 사용자 설명서 - 페이지 29

{카테고리_이름} Yamaha YVC-1000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YVC-1000 45 페이지. Microphone & speaker system
Yamaha YVC-1000에 대해서도 마찬가지입니다: 사용자 설명서 (37 페이지), 사용자 설명서 (16 페이지), 테스트 매뉴얼 (2 페이지)

페이지 인쇄
Yamaha YVC-1000 사용자 설명서
■
When automatic audio tuning has ended abnormally (problem detection)
When automatic audio tuning has ended abnormally (problem detection), the tuning fork button (
at high speed. Check the detected problems using the voice guidance, and take the appropriate action, referring to
"Warning guidance list" (page 42).
1
Press the tuning fork button (
while it is flashing orange at high
speed.
The voice guidance notifies the user about the
detected problem three times at 5-second intervals.
2
The voice guidance notifies the user
about the next problem one minute
after the playback of the first problem
has been completed.
After the playback of all the problems is completed,
the tuning fork button (
product returns to the normal mode.
■
Detecting acoustic conditions in general use
If any problem is detected in acoustic conditions in general use, the tuning fork button (
orange. Check the detected problems using the voice guidance, and take the appropriate action, referring to "Warning
guidance list" (page 42).
While the button is lit or flashing orange, press the tuning fork button (
The voice guidance notifies the user about the detected problem.
When the voice guidance ends, the tuning fork button (
y
If the tuning fork button (
lights up green.
)
) lights up green, and the
) is pressed during guidance playback, the playback is stopped, and the tuning fork button (
Tuning fork button:
High-speed flash (Orange)
y
• If the tuning fork button (
while it is flashing orange at high speed, the tuning fork
button (
) lights up green, and the product returns to the
normal mode.
• If the tuning fork button (
playback, the product works as shown below depending
on guidance conditions.
- When a problem is replayed: The playback is stopped,
and the product enters the standby mode (1 minute) to
replay the next problem.
- When a problem is not replayed: The playback of the
next problem starts immediately.
).
) lights up green.
) flashes orange
) is not pressed for 5 minutes
) is pressed during guidance
) lights up or flashes
28
)