Yamaha 150AET 매뉴얼 - 페이지 14
{카테고리_이름} Yamaha 150AET에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha 150AET 15 페이지.
페이지 인쇄
LOWR
BACKLASH (REGULAR ROTATION MODELS)
6645
6665
6670
Measuring steps
(1) Set the shift rod into the neutral posi-
tion.
Shift rod wrench
YB-06052 / 90890-06052
(2) Load the reverse gear by installing the
propeller without the spacer 1 and
then tighten the propeller nut.
Propeller nut
10 Nm (1.0 m • kgf, 7.2 ft • lb)
(3) Install the backlash indicator onto the
drive shaft (on the 22.4 mm (0.88 in)
diameter portion of the drive shaft).
Backlash indicator .................... 1
YB-06265 / 90890-06706
(4) Install the dial gauge onto the lower
unit and have the dial gauge plunger
contact the mark on the backlash indi-
cator.
Magnetic-base plate................. 2
YB-07003 / 90890-07003
Dial gauge set ........................... 3
YU-03097 / 90890-01252
Magnetic base........................... 4
YU-34481 / 90890-06705
(5) Set the lower unit upside down.
(6) Slowly turn the drive shaft clockwise
and counterclockwise. When the drive
shaft stops in each direction, measure
the backlash.
6-92
E