Caliber MCD 165 사용 설명서 - 페이지 8

{카테고리_이름} Caliber MCD 165에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Caliber MCD 165 19 페이지. Car cd/mp3 player / rds receiver

5. BASIC OPERATIONS

1) PANEL RELEASE BUTTON (REL)

Press this button to remove the control panel.

13) POWER ON/OFF BUTTON (

Press the POWER button on the front of the unit to turn on the unit. Long press the POWER

button to turn Off the unit.

13) MUTE BUTTON (MUTE)

Short Press the MUTE button to mute the audio output, and "Mute" will appear on the

display. Press the mute button again to restore the audio output to the previous level.

11) DISP BUTTON(DISP)

Press this button to view clock, Programme Type (PTY), and Frequency of the station in listening.

2) ENCODER VOLUME KNOB

Turn this knob to adjust desired volume level.

12) MODE BUTTON (MODE)

Press this button to select different mode , sequence as follow:

A) Tuner mode (Radio)

B) CDP / MP3 (only if a CD or MP3 disc is inserted)

C) AUX IN (optional, only if this unit with this features)

18) FRONT PANEL AUX-IN JACK

Connect the external signal to AUX in jack located at the front of the panel , then press Mode

button to select Aux mode. Press Mode Button again to cancel Aux Mode and return to previous

mode.

OPEN THE AUX-IN JACK DOOR/COVER

TO ACCESS TO THE AUX-IN JACK

RESET BUTTON

The RESET button is located on the main unit (as shown on the diagram). To press it vertically

with a ballpoint pen or metal object will activate it. The reset button is to be activated for the

following reasons:

Initial installation of the unit when all wiring is completed.

All the function buttons do not operate.

Error symbol on the display.

Note: If press RESET button, the unit still cannot function normally, please use a cotton swab

soaked in isopropyl alcohol to clean the socket on the back of the control panel.

)

AUX IN

E - 7

FRONT CABINET

LEFT TRACK

RIGHT TRACK

GROUND

AUX IN