Caliber MCD-263 사용 설명서 - 페이지 10
{카테고리_이름} Caliber MCD-263에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Caliber MCD-263 19 페이지. Cd/mp3 car radio with rds function
페이지 인쇄
2. When the call ends
Hang up the phone.
'TEL CALL' disappears from the display.
The original source (i.e. the one used
before the phone call) is returned to
automatically and the volume restored
gradually.
Reset function
RESET
button must be activated with either
a ballpoint pen or thin metal object. The
RESET
button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note:
if you press
RESET
work yet, please use a cotton swab soaked
in isopropyl alcohol to clean the socket on
the front panel.
button, the unit can't
Radio Operations
SWITCHING TO RADIO MODE
Press
MODE
button to select radio mode,
the radio mode appears on the LCD display
together with the memory band and
frequency.
SELECTING THE FREQUENCY BAND
Press
BND
button to select the desired
band. The reception band will change
,
between FM1 FM2 FM3.
SELECTING STATION
- Press preset
1-6
which had been stored in the memory.
- Press the
button for 2 seconds until
"MANUAL" appears on the display, and
then press the
station. If both buttons have not been
pressed for several seconds, they will
return to automatic seek mode .
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press the
AS/PS
button for 2 seconds, the
radio searches from the current frequency
and checks the signal strength until one
cycle search is finished. And then 6
strongest stations are stored into the
corresponding preset number button.
- Program scanning
Press the
AS/PS
button shortly to scan
preset station. When the field strength level
is more than the threshold level of stop
level, the radio is holding at that preset
number for several seconds with release
mute, and then searches again.
STATION STORING
- Press the
button to activate
automatic seek mode.
- In manual mode, press the
select a station.
Press the preset
1-6
store current station into the number button.
,
button to select a station
button to select a
button to
button for 2 seconds to