Directechs DB3 설치 매뉴얼 - 페이지 20

{카테고리_이름} Directechs DB3에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directechs DB3 20 페이지. 2011 subaru outback - 403.subaru2 1.25
Directechs DB3에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (10 페이지), 사용 설명서 (17 페이지)

페이지 인쇄

Quick Reference Guide (customer copy)

Sending commands to your vehicle

Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there

are 3 possible ways you can send commands to your vehicle, using the:

• Factory remote.

• Aftermarket remote.

• Directed SmartStart application via your smartphone.

If applicable, you can also start the engine remotely by pressing the Lock button 3 times

quickly on your factory remote.

Important!

To remote start the vehicle, ALL doors must be closed and locked.

Vehicle takeover

The vehicle takeover feature is not available for this vehicle. The engine will shut down as

soon as a door is opened.

Pit stop/idle mode

Stop the vehicle in a safe parking spot and put the gear

in Park (P).

Press the Remote Start button on the transmitter.*

The parking lights will flash once to indicate the vehicle is

now in Pit Stop Mode.

It is safe to leave the engine running and exit the vehicle

with the factory remote in hand.

Note: We recommend that you always lock the doors of

your vehicle when leaving it unattended.

* Icon and remote appearance may differ depending on the model purchased.

403.TL8 2.32 2015 Lexus NX 200t (Smart Key)

List of available commands

Note that the information below is for many Viper, Clifford, Python, Avital, Automate,

Autostart and AstroStart models. Icons and commands may differ depending on the model

and options purchased. Refer to your authorized installation center for more specific

information.

Button(s)

* Icon and remote appearance may differ depending on the model purchased.

Notes

Put

gear in Park

14:36

Parking lights

Press

flash x1

Remote

Start

button*

14:36

Exit

vehicle

with

remote

Actions

Press & hold for 1 second to lock.

Press & hold for 1 second to unlock.

Press & hold for 1 second to remote start.

* Press & hold for 5 seconds to activate the trunk release (optional).