Directechs DB3 사용 설명서 - 페이지 11
{카테고리_이름} Directechs DB3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Directechs DB3 17 페이지. 2011 subaru outback - 403.subaru2 1.25
Directechs DB3에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (10 페이지)
페이지 인쇄
SmartStart Pro/Digital RF Kit/XL202 installation notes
The DB3 Remote Start Ready (RSR) solution offers four (4) configuration options to control your system: 3x OEM Lock Remote Start
Activation (if applicable, refer to the "vehicle function compatibilities" section), SmartStart Pro, Digital RF Kit, XL202 & Analog RF Kit (all sold
separatly). This section provides specific installation information for these solutions.
SmartStart Pro
Must have the Gray wire grounded before connecting to the D2D port.
SmarStart
Cable
Note: The SmartStart Pro is optional and must be purchased separately.
Digital RF Kit
SmarStart
The DB3 must be programmed to the vehicle before pairing.
Cable
This configuration requires the remote and the antenna to be paired by following the pairing procedure provided with the Digital RF Kit.
D2D
Cable
SmarStart
Cable
D2D
Cable
Note: The Digital RF Kit is optional and must be purchased separately.
D2D
XOVER Cable
XL202 & Analog RF Kit
D2D
Cable
Use the D2D Crossover (XOVER) cable that is provided with XL202 (not the one in the DB3 package)
Follow the XL202 Programming Guide to pair the remote to the XL202.
D2D
XOVER Cable
D2D
XOVER Cable
Note: The XL202 and antenna are optional and must be purchased separately.
11
403.MA3 2.42.104 2014 Mazda 3 (Smart Key)
©2023 Directed. All rights
Configuration wires (Gray & White)
Connect Gray wire to (-) Ground
5 pins
4 pins
2 pins,
not used
Configuration wires (Gray & White)
D2D (4 pins, white)
Connect Gray wire to (-) Ground
5 pins
4 pins
2 pins,
not used
Configuration wires (Gray & White)
D2D (4 pins, white)
Connect Gray wire to (-) Ground
5 pins
4 pins
2 pins,
not used
D2D (4 pins, white)
THIS SIDE UP
THIS SIDE UP
THIS SIDE UP