Blackberry PEARL 시작하기 매뉴얼 - 페이지 11
{카테고리_이름} Blackberry PEARL에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Blackberry PEARL 25 페이지. Blackberry pearl
Blackberry PEARL에 대해서도 마찬가지입니다: 안전 및 제품 정보 (16 페이지), 참조 매뉴얼 (46 페이지), 팁 (4 페이지), 여기에서 시작하기 매뉴얼 (6 페이지), 팁과 요령 (2 페이지), 빠른 시작 매뉴얼 (13 페이지)
페이지 인쇄Get Started Using the BlackBerry Pearl
Make a Push to Talk Call
Steps?
Set Up
3
1. On the Home screen, click the PTT icon or activate PTT by pressing the
Takes?
PTT Key on the left side of the BlackBerry Pearl (Left Side Convenience
1 minute
key).
Note:
2. Select Yes when asked if you want to initialize PTT.
You must have a PTT
3. When asked to, enter a name (up to 20 characters) and select OK.
subscription to set up
the PTT service.
4. Once initialization is complete, (it can take a few minutes), PTT is
ready for use and an icon will appear near the top of the home screen.
To confirm PTT is
activated select the
PTT icon on your
home screen, the
bottom of the screen
should read PTT
is On.
Make a Push to Talk Call
1. On the PTT Menu screen, click PTT Contacts.
2. To speak or listen, perform one of the following actions:
a. To speak, hold the Left Side Convenience key.
b. To listen, release the Left Side Convenience key.
To end the Push to Talk call, hold the
20
Make a Push to Talk Call
End
key.
Set Up Voicemail
Add a Push to Talk Contact
Verify that the contact subscribes to AT&T Push to Talk service. When
you add a Push to Talk contact, you invite the contact to join your
contact list. The contact can accept, decline, or defer your invitation.
1. On the PTT Menu screen, click Add Contact.
2. Type the contact information.
3. Click OK.
Set Up Voicemail
Press and hold the
1
key on your BlackBerry Pearl. You will be
connected to the AT&T voicemail system, which will then ask you to:
1. Create your password
2. Record your name
3. Record a greeting
Check Your Voice Mail Messages
From Your BlackBerry Pearl
1. Press and hold the 1 key.
2. Follow the voice prompts.
Steps?
3
Takes?
2 minutes
Check Your Voice Mail
Messages From Other
Phones:
1. Dial your 10-digit
wireless number.
2. Press the
*
key
when you hear your
personal greeting;
( Press the
#
key for
Puerto Rico)
3. Enter your personal
passcode.
4. Follow the voice
prompts.
21