ABB OVRHSP 1201 P Series 설치, 운영 및 유지보수 매뉴얼 - 페이지 7

{카테고리_이름} ABB OVRHSP 1201 P Series에 대한 설치, 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB OVRHSP 1201 P Series 12 페이지. Surge protective devices

Mounting

Mounting (OVRHSP)

Mount the OVRHSP to the building structure using construction

methods and hardware appropriate for your site. Install the

conduit and pull the conductors as specified in Table 2.

Mounting (OVRHSR)

Mount the OVRHSR to the building structure using construction

methods and hardware appropriate for your site.

Mount the OVRHSR into the wall. Electrician can mount to the

back wall, if the back wall is made of structural material such

as masonry or plywood. (Drywall is not a structural material). If

back wall is not made of structural material, the electrician can

create brackets to hold the SPD to the adjacent studs.

After the drywall has been installed, install Flush Mounting

Plate (FMP) by first removing the OVRHSR enclosure lid.

Place the FMP over enclosed body. Attach the FMP to the

wall using the enclosed hardware kit. Screw the lid back on

to the enclosure body.

330.2 mm

(13")

279.4 mm

(11")

OVRHSR 120, 160

Weight: 9 kg (20 lbs.)

Indoor vs. outdoor installations

Stainless steel enclosures are suitable for corrosive

environments as well. For direct sunlight applications,

ABB suggests shading the monitoring components.

OVRHSP/OVRHSR surge protective device | Product manual 7