Directed 403.MIT3 설치 매뉴얼 - 페이지 11

{카테고리_이름} Directed 403.MIT3에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed 403.MIT3 20 페이지.

Module programming for convenience features only (skip transponder)

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.

Ensure vehicle is in a safe location and cannot move forward during programming. For vehicles

equipped with a manual transmission, make sure the gearshift is in the neutral position.

The harnesses must be connected in this exact order:

1. Connect the 14-pin.

2. Connect the 12-pin.

3. Connect the 10-pin.

When the LED turns ON solid orange, proceed with the next step.

Press the programming button five (5) times.

The LED turns ON solid orange.

Turn ignition ON and wait until the LED turns OFF.

Turn ignition OFF.

You have successfully completed the module programming sequence.

403.MIT3 2.11 2008 Mitsubishi Lancer

Solid

Connect

Solid

Press &

Release x5

Key IN

START

Off

Key OUT

START