Clark Synthesis TACTILE SOUND TST239 설치 매뉴얼 - 페이지 4

{카테고리_이름} Clark Synthesis TACTILE SOUND TST239에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clark Synthesis TACTILE SOUND TST239 20 페이지. Platinum, gold, silver and all weather transducers
Clark Synthesis TACTILE SOUND TST239에 대해서도 마찬가지입니다: 데이터시트 (1 페이지)

페이지 인쇄

1. Supplied Parts

Supplied Parts

SUPPLIED PARTS (ILLUSTRATED BELOW)

A. (1) TST209 Transducer

B. (1) Unimount Bracket

C. (1) 3/8"-16 x 3" Hanger Bolt

D. (1) 3/8"-16 x 3" Threaded Stud

E. (1) 3/8"-16 x 1.5" Threaded Stud

F. (1) 3/8"-16 x 1" Hex Bolt

G. (4) #12 x 1" Screw

H. (2) 3/8" Jam Nut

I. (4) #12 Washer

J. (4) #12 Lock Washer

K. (1) 3/8" Washer

L. (1) 3/8" Lock Washer

M. (1) T-Nut

• Installation Guide

Tactile Sound Transducers

REQUIRED TOOLS AND MATERIALS

Depending on your application, you will need

some or all of these tools and materials for your

installation:

• #2 Phillips Screwdriver

• (2) 9/16" Open-Ended Wrenches

• Drill

• Saw

• Wire Stripper

• Soldering Gun or Wire Nuts

• Adhesive (construction glue)

• Hardwood (oak, maple, ash, etc., not pine or

softwoods) for creating mounting bridges

• Speaker Cable (min. 16 AWG; 12-14 AWG

recommended)

Side View

3-D View

Front View