Caliber RMD 069 설치 매뉴얼 - 페이지 9

{카테고리_이름} Caliber RMD 069에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caliber RMD 069 14 페이지.

SELECT MODE

By pressing this button(3) to go to different function mode:

- Tuner (radio)

- USB

to go to this mode USB device must be connected.

- Memory Card

to go to this mode must be have a Memory Card in.

- AUX in put

DISPLAY

Press DISP button (4) to operate as the conversion of each display mode as follow:

- Time is displayed for 5sec when DISP key is pressed, and it returns to its

previous display ( Folder, File name...) unless DISP key is pressed again.

3) From the clock mode, when DISP Key is pressed for longer than 1sec,

clock mode switches to clock Adjusting mode and the clock display

begins flashing. At this time clock can be changed by pressing (+/-),

or the ENCODER VOLUME.

LIQUID CRYSTAL DISPLAY

Exhibit current frequency and activated functions on the display (5).

RESET

RESET button (6) is placed on the housing and must be activated with either

a ball point pen or thin metal object. (Do not use sharp object to avoid damaging

the unit.) The RESET button (6) is to be activated for the following reasons:

- Initial installation of the unit when all wiring is completed.

- All the function buttons do not operate.

- Error symbol on the display.

GENERAL OPERATIONS