Caliber HFG 501BTI 매뉴얼 - 페이지 6
{카테고리_이름} Caliber HFG 501BTI에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caliber HFG 501BTI 10 페이지.
페이지 인쇄
Wi-Fi Network Setup for AirPlay
Check list
Please verify the following steps before attempting to connect your player to a Wi-Fi network:
To enjoy AirPlay wireless audio, you must have the following:
- iTunes or an iOS device (iPod touch, iPhone, or iPad).
- A functioning home network with Wi-Fi.
Download the latest software updates for iTunes and your iOS device to ensure that you are able to enjoy the latest AirPlay
enhance- ments and compatibility.
Have your Wi-Fi network name (SSID) and password (if applicable) available for reference.
Note: A
irPlay requires iTunes 10.5 (Mac and PC) or later; or an apple device with iOS 5.0 system or later.
Option B: onnecting with your iPod touch, iPhone, iPad, Mac or PC over Wi-Fi
C
1. Press the
Volume -
and
Power/Mode
for more than 5 seconds to start Wi-Fi network setup.
Note: The Wi-Fi status LED blinks in green and red alternately.
2. On your iOS device, Mac or PC, select the network called
from Wi-Fi network settings.
3. Launch a web browser (e.g. Safair, Chrome, or Firefox) and type in
"192.168.1.12"
at the address bar.
4. Select the "Profile Configuration" to set the network setup.
5
. Select preferred Wi-Fi network from the "Select Option"
list of available. If a password is necessary for the Wi-Fi
network, please input it in the "WPA Passphrase".
Apply
6. Click
at the bottom of the page to apply your settings.
And then click
OK
on the popup menu to confirm your
settings.
After a while, the Wi-Fi status LED stops blinks and stays
7.
green. The unit joins the Wi-Fi network successfully.
Connected
8. Select the same Wi-Fi network on your iOS device, Mac
or PC. Wait until successful Wi-Fi connection to the router.
A Wi-Fi signal icon is displayed on AirPlay device.
S
uccess!
Congratulations, you have successfully connected your player to your wireless network and now you can start enjoying wireless
audio anywhere in your home or o ce.
Note: To begin using AirPlay wireless streaming, your AirPlay source devices (Mac or PC with your iTunes library as well as your iPod
touch, iPhone or iPad) must be connected to the same Wi-Fi network that the unit is connected to.
Restart the Wi-Fi network from player
To restart the current network, click the Reset button on the right of back panel for 3 seconds, source LED will illumine
lightblue. After a while, the Wi-Fi status LED indicates from green to red .
button on the top panel together
"HFG 501BTi
Not Connected
-5-
AirPort: On
Turn AirPort O
HFG 501BTi CALIBER
Another network
Another network
CALIBER"
Another network
Another network
Devices...
Join Other Nework...
Create Network...
Open Network Preferences...
Customize the name
of your speaker
http://192.168.1.12
HFG 501BTi CALIBER
Status Inforamtion
Profile Configuration
Digital Media Player Name:
HFG 501BTi CALIBER
Firmware Update
Active Profile:
1
JB Access Point
1
choose Profile to be configured:
Profile 1
Profile name:
Profile 1
Digital Media Player Wireless LAN Settings
Service Set ID (SSID):
WPA Passphrase:
Allow Ad-hoc connection:
[ + ] ADVANCE SETTINGS
Apply
Click for
confirm
Profile Configuration
Current Profile
Apply
Show
Select Option
Ad-hoc
Select your Wi-Fi
network from list