aerauliqa WHS500 매뉴얼 - 페이지 14
{카테고리_이름} aerauliqa WHS500에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aerauliqa WHS500 20 페이지.
페이지 인쇄
Staffe di appoggio per
il trasporto in imballo
transport foot
Fig. IV
10,5
Fig. VI
Fig. VI
Fig. VI
Fig. VIII
Fig. VIII
Fig. VIII
Fig. IX
Fig. V
Fig. V
Fig. V
325
295
154
dimensions in mm of the
Dimensioni in mm delle piastre
brackets (3)
di fissaggio a soffitto (3)
8
10
9
14
11
11
11
Fig. IX
19
Fig. VII
Fig. VII
13
Fig. VII
12
12
12
14
• Remove
transport
the main body (1) by
unscrewing the bolts,
washers and locknuts.
• Let out the safety wire
(16) laterally, hooking the
snap-hooks (19) to the
eyebolts on the motor,
verifying
tightening.
• Fix the assembly to the
ceiling/beam through the
18
18
8 holes on the brackets
(3); fix the security wire
to the ceiling/beam using
the clamps (18). Fixing
screws/plugs are not
supplied.
• Insert the blade (13) over
the blade root, lock it with
the M8 flange bolts (8),
spring washers (10) and
locknuts (9).Tighten the
screws making reference
to table 1.
Mount the plastic caps
(14) on the locknuts.
• Mount the plastic hub
cover (11) under the hub
using the M4 bolts (12).
In case water is used
for washing, drill a hole
in the plastic cover for
water drainage.
the
three
feet
from
the
correct