ACOPOWER HY-SPKP-500W40A 사용자 설명서 - 페이지 15

{카테고리_이름} ACOPOWER HY-SPKP-500W40A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACOPOWER HY-SPKP-500W40A 17 페이지. Solar panel kits

One of the most basic solar configurations involves wiring two solar panels in parallel.

This parallel configuration will increase the current output while the output voltage

remains the same. Fig.6 above shows the arrangement for connecting two solar panels in

parallel with one pair of MC4 Y-Branch Connectors. This arrangement is applicable if two

solar panels will be mounted adjacent to one another. This connection requires one (1)

pair of MC4 Branch Connectors. When the panels are mounted at different locations- that

is, separated by a distance, the panels must be extended with MC4 Extension Cables

(sold separately).

Three adjacent panels in parallel (12V systems) 300W

Three solar panels is the maximum amount of panels that can be connected in parallel if they

are adjacent to one another, without using extra cabling. Fig. 7 above shows the arrangement

for connecting three solar panels in parallel. Remember that this arrangement is applicable if

the three solar panels are to be mounted adjacent to one another. This connection requires

two (2) pairs of MC4 Y-Branch Connectors. When one or multiple panels are mounted at

different locations- that is, separated by a distance, the panels need to be extended with MC4

Extension Cables (sold separately).

Figure 7 Three 100W Panels in parallel

Address:4120 Valley Blvd, Walnut CA 91789, USA

Call: (626) 575-7722

Web:www.acopower.com