Clarke 6462182 운영 및 유지 관리 지침 - 페이지 11

{카테고리_이름} Clarke 6462182에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 6462182 20 페이지.

ADJUSTING THE SOLE-PLATE

The sole-plate is adjustable so that bevels of up to 45° may be cut. Loosen the

two socket head screws under the sole-plate before adjusting it to the

desired angle and re-tightening the screws.

Socket head

screws

However, if absolute accuracy is required you should always check the angle

with a protractor whilst carefully tightening the securing screws. This includes

setting the base plate for cutting at 90°, (check roller is still only just touching

blade).

DUST EXTRACTION

The jigsaw is provided with a dust extract port, where a vacuum extractor

may be connected to the rear of the machine. Please note however, that

this does not preclude the user from wearing a face mask to prevent the

inhalation of dust particles.

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]