Clarke 7617010 운영 및 유지보수 지침 매뉴얼 - 페이지 7

{카테고리_이름} Clarke 7617010에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 7617010 17 페이지. Body repair kit

ASSEMBLY

When assembling the Hydraulic Ram, Pump unit and attachments, unscrew

and retain the plastic end plugs on the connections of the Ram and Hydraulic

Spreader Wedge for future use. Ensure the hydraulic hose is tightly screwed to

the connection.

1. Screw the Pump Handle into the socket in the pump unit.

2. If the Hydraulic

Spreader Wedge is

to be used, connect

the screw-in

connector of the

pump hose to the

spreader wedge as

shown in Fig 1.

3. If the Ram is to be

used, fit the Flat Base to the static end of the Ram using the male

connector. Connect other attachments to the moving end as required.

• Various combinations of extension tubes and attachments can be

assembled as shown in Fig 2, according to the distance between

the work surface and the supporting frame.