Clarke BJ300 사용자 지침 - 페이지 15

{카테고리_이름} Clarke BJ300에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke BJ300 17 페이지. Biscuit jointer

•

Always inspect the tool before use and ensure it is in top condition.

•

Keep the ventilation slots clear at all times, prevent foreign matter from entering.

•

Check the power cable to ensure it is in sound condition and free from cracks,

bare wires etc.

•

Avoid using solvents to clean the plastic parts of the jointer, most plastics are

susceptible to damage from the various types of commercial solvents. Use a

moist soft cloth only.

•

Lubricate all moving parts at regular intervals.

•

After extensive use the grease in the gearbox will require replenishment, consult

your CLARKE dealer regarding this.

PROBLEM: Biscuit Jointer is Overheating.

CAUSE:

The tool is dirty.

Tool is being overloaded.

PROBLEM: Excessive Sparking Occurs.

CAUSE:

Worn motor brushes.

PROBLEM: Biscuit Jointer does not operate when switched ON.

CAUSE:

Blown fuse.

MAINTENANCE

TROUBLE SHOOTING:

Clean the ventilation holes, blow out

with compressed air or clean with a

dry cloth.

Do not use for heavy duty work, do

not apply excessive pressure.

TROUBLE SHOOTING:

Consult your CLARKE dealer for parts

and advise.

TROUBLE SHOOTING:

Check the fuse is sound and replace

if required. If the fuse continues to

blow or the fuse is sound and the

jointer fails to operate consult your

CLARKE dealer.

- 14 -