Clarke CAT51 운영 및 유지 관리 지침 - 페이지 4

{카테고리_이름} Clarke CAT51에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CAT51 13 페이지. Needle scaler

• Moving to another work area.

• Passing the tool to another person.

13. Never use the tool if it is defective or operating abnormally.

14. This tool should be serviced at regular intervals by qualified personnel.

15. Avoid damaging the tool f by applying excessive force.

16. Always maintain the tool with care. Keep it clean for the best and safest

performance.

17. Quick change couplings should not be located at the tool. They add

weight and could fail due to vibration.

18. Do not force or misuse the tool. It will do a better and safer job at the rate

for which it was designed.

19. Do not remove any labels. Damaged labels should be replaced.

20. This tool vibrates with use. Vibration may be harmful to your hands or arms.

Stop using the tool if discomfort, a tingling feeling or pain occurs. Seek

medical advice before resuming use.

TRANSPORT & STORAGE

1. Never carry the tool by the air hose or with your finger on the trigger.

2. Always disconnect from the air supply when changing bits or when the tool

is not required for immediate use in order to avoid accidental starting.

3. Always use both hands to control the tool.

4. Always ensure the tool has stopped before putting it down after use

5. When not in use the tool must be disconnected from the air supply and

stored in a dry place out of the reach of children.

6. Avoid storing the tool where the temperature is below 0

Please keep these instructions in a safe place for future reference.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]