Clarke CAT52 운영 및 유지 관리 지침 - 페이지 7

{카테고리_이름} Clarke CAT52에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CAT52 17 페이지. 4” angle grinder
Clarke CAT52에 대해서도 마찬가지입니다: 운영 및 유지보수 지침 매뉴얼 (6 페이지)

페이지 인쇄
Clarke CAT52 운영 및 유지 관리 지침

BEFORE USE

WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU
ARE FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF AIR
COMPRESSORS AND COMPRESSED AIR SUPPLY.
NOTE: Ensure the compressor is turned off.
1. Remove the blanking plug from the air inlet of the tool.
2. If required, connect an in-line mini oiler to the tool.
• A mini oiler helps to prolong the life of the air tool.
3. If a mini-oiler is not being used, run
a few drops of oil through the tool
before use. It can be entered
through the air inlet or via the hose
at the nearest connection to the
air supply.
4. Connect a suitable hose to the air
inlet as shown.
5. Connect the other end of the hose
to the compressor.
6. Your air tool is now ready for use.
You can fit a whip hose with a quick fit coupling if required (available from
your Clarke dealer).

FITTING THE SIDE HANDLE

1. Screw the side handle to the main
body as shown.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7