ALDI FERREX HS-060E-30 사용자 설명서 - 페이지 6
{카테고리_이름} ALDI FERREX HS-060E-30에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ALDI FERREX HS-060E-30 16 페이지. 30w soldering iron set
페이지 인쇄
Safety
instructions
EN@
Follow the safety instructions contained in this manual. Failure to
follow
the safety warnings and instructions may result in injuries caused by
electric shock, burns, fire or toxic fumes.
a) This appliance is not intended
for
use
by persons (including
children)
with
reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have
been given supervision or
instruction concerning
use of
the
appliance by
a
person responsible for their safety.
b)
To
prevent the risk of
injury
damaged mains cables may only
be replaced by
the manufacturer, by
customer service or by a
similarly qualified person.
c) Allow the soldering iron to cool down completely in air
after
use
before you put it away.
rNTq
rhe
soldering iron
has
to
be inserted into
the holder when it
is
not being used.
d)
Do
not
use
the soldering iron
if
the handle, the
mains cable or
the
plug are damaged. Never open the soldering iron!
e)
Do
not expose the soldering iron to moisture or rain.
f)
Work close to
the power
socket
so
that you
can disconnect
the plug in
an emergency.
g)
Before heating the soldering iron, check if the
tip
is
mounted
properly
and
tighten the fixing
screw
if
necessary.
h)
Never heat the soldering iron
without
attaching
a
soldering
tip.
i)
Remove or change the soldering
tip
only when the soldering iron
is
switched off and the soldering
tip
has cooled
down.
j)
Avoid contact between the hot parts of the soldering iron and the
plastic parts of the soldering iron stand.
k)
Do
not touch the hot soldering iron tip, the melted solder or hot
components while soldering, there
is
a
risk of burns!
The
soldering
stand
can become
hot when the soldering iron
is placed on
it.
l)
Do
not bring flammable or heat-sensitive objects
close
to the hot
soldering iron.