Clarke CCT48 운영 및 유지보수 지침 매뉴얼 - 페이지 5

{카테고리_이름} Clarke CCT48에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CCT48 13 페이지. Cordless tacker 6485070

8. Do not use the machine to fasten electrical wiring. Contact with electric wires can

lead to fire and electric shock.

BATTERY CHARGER

1. Observe the mains voltage! The voltage of the power supply must correspond with

the data given on the rating plate of the battery charger.

2. Keep the battery charger away from rain or moisture. Penetration of water in to the

battery charger increase the risk of an electric shock.

3. Keep the battery charger clean. Contamination can lead to danger of an electric

shock.

4. Before each use, check the battery charger, cable and plug. If damage is

detected, do not use the battery charger. Never open the battery charger yourself.

Have repairs performed only by a qualified technician and only using original spare

parts. Damaged battery chargers, cables and plugs increase the risk of an electric

shock.

5. Do not operate the battery charger on easily inflammable surfaces (e.g., paper,

textiles, etc.) or surroundings. The heating of the battery charger during the charging

process can pose a fire hazard.

SYMBOLS

This stapler/nailer has an actuation system in which the trigger and safety yoke

are linked in such a way that it will only operate if the trigger is pulled after the

safety yoke (muzzle) has been applied to the work. Further driving operations

require the user to release the trigger and lift the safety yoke (muzzle) away from

the workpiece before the next use.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

Read manual

before use

This symbol indicates that this is a Class II product, and does

not require an earth connection.

Wear suitable eye

protection