Clarke CIR18LiC 운영 및 유지 관리 지침 - 페이지 9

{카테고리_이름} Clarke CIR18LiC에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CIR18LiC 17 페이지. Cordless impact wrench

The battery pack should slide in easily. If it is not to be fitted immediately,

ensure that the metal contacts are protected to avoid the possibility of a short

circuit which would cause battery damage. For maximum battery life, we

recommend that you maintain the battery in a fully charged state.

OPERATION

CAUTION: MAKE SURE THAT THE IMPACT WRENCH IS OFF USING THE

SELECTOR BAR BEFORE ATTACHING OR REMOVING A SOCKET. ALWAYS

TAKE CARE TO USE THE CORRECT SIZE SOCKET FOR BOLTS AND NUTS. AN

INCORRECT SOCKET WILL CAUSE DAMAGE TO THE BOLT OR NUT.

1. Align the chosen socket and

simply push it onto the anvil. Use

only ½" square drive impact

sockets as listed on page 12.

2. Squeeze the trigger to start the

impact wrench. Release the

trigger to stop.

1. Select the direction of operation

by pushing the selector bar in the

appropriate direction.

• The direction of rotation is

shown on the end face of the

selector bar.

• When the selector bar is in the

central position the trigger is

locked.

2. Always check the direction of

rotation before operation.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]