Clarke CJS20Li 운영 및 유지보수 지침 매뉴얼 - 페이지 7

{카테고리_이름} Clarke CJS20Li에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CJS20Li 17 페이지. 20v cordless jigsaw

FITTING THE BATTERY PACK (NOT SUPPLIED)

This 20V Jigsaw requires a 20V battery pack (6487040) and 1 Hour Charger

(6487050) to operate. Both are available separately from your local Clarke

dealer.

TO FIT THE BATTERY

1. Slide the battery pack on to the

jigsaw.

TO REMOVE THE BATTERY

1. Push and hold the release buttons

on the side of the battery pack.

2. Slide the battery pack away from

the jigsaw.

CAUTION: MAKE SURE THAT THE BATTERY PACK IS REMOVED TO AVOID

RISK OF ACCIDENTAL STARTING.

This jigsaw is equipped with a tooless blade holder which allows fast and

convenient blade changing.

1. Push and hold the blade holder up.

2. Insert the blade as far as possible,

with the teeth facing forwards.

• Use only jigsaw blades with the

correct T-shank.

• Do not use blunt or damaged

blades.

3. Release the blade holder and gently

pull on the blade to make sure that it

is secure before refitting the battery.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]