Clarke CMFTLi 운영 및 유지보수 지침 매뉴얼 - 페이지 14

{카테고리_이름} Clarke CMFTLi에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CMFTLi 17 페이지. Cordless multi function tool

MAINTENANCE

Before starting any cleaning or maintenance, always ensure the tool is

isolated from the electrical supply by switching off and removing the plug

from the power socket.

CLEANING

1. Ensure all air ventilation slots are clear,

2. Clean the exterior of the tool with a soft cleaning cloth. Never use any

chemicals or harsh abrasives. Avoid using solvents when cleaning plastic

parts, which may be susceptible to damage from various types of

commercial solvents.

GENERAL MAINTENANCE

• All bearings etc, in this tool are lubricated with a sufficient amount of

high grade lubricant for the tools lifetime under normal operating

conditions, therefore no further lubrication is necessary.

• The carbon brushes in the tool will eventually wear down to such an

extent that sparks will be noticed inside the tool and its performance

will deteriorate. Brushes are a consumable spare which should be

replaced by your Clarke dealer or power tool repairer.

• Refer to your CLARKE dealer if internal maintenance is required.

Battery Type/Voltage

No-load speed

Weight (without battery pack)

Dimensions (without battery pack) (L x W x H)

Sound Power Level (LWA)

Sound pressure Level (LPA)

Sound Uncertainty Value (K)

Vibration

Battery Charger Voltage

Battery Charger Output Current

Battery Charger Output Voltage

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

Li-Ion 10.8 VDC

5000-16000 Oscillations /Minute:

0.896 kg

270 x 130 x 200 mm

87 dB(A)

76 dB(A)

3 dB(A)

2.39 m/s² (Uncertainty Value (K) 1.5 m/s²)

230 VAC (50Hz)

500 mA

12 V