Clarke CPSB100B 운영 및 유지보수 지침 매뉴얼 - 페이지 6

{카테고리_이름} Clarke CPSB100B에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CPSB100B 17 페이지.

ASSEMBLE THE AXLE

1. Slide the axle through the holes at

the bottom of the handlebars, see

Fig 3.

2. Slide a washer onto each end of

the axle.

3. Slide a wheel onto each end of

the axle followed by another

washer.

4. Slide a split pin through the holes in

each end of the axle and bend it

so that the wheels/washers cannot

slide off, see Fig 4.

1. Roll the tank over so that the

handlebars are now facing down.

2. Align the holes of the leg with the

holes in the leg mounting on the

tank, see Fig 5.

3. Insert the split pin through the

holes and bend it so the front foot

cannot slide off the leg mount.

1. Slide the hose onto the outlet at

the bottom of the sandblaster as

shown in Fig 6.

2. Tighten the clip shown to secure

the hose.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]