Clarke CPSB200B 운영 및 유지보수 지침 매뉴얼 - 페이지 6

{카테고리_이름} Clarke CPSB200B에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CPSB200B 17 페이지. Pressurised sandblaster

3. Slide a wheel onto each end of

the axle followed by another

washer.

4. Use the circlip provided to secure

the wheel, see Fig 4.

5. Press the wheel cover onto the

wheel as shown in Fig 5.

ATTACH THE FRONT LEG

1. Roll the tank over so that handlebars

are now facing down.

2. Align the holes of the front leg

with the holes in the leg mounting

on the front side of the tank, see

Fig 6.

3. Insert a split pin through the holes

and bend it so the front leg

cannot slide off the leg mount.

1. Slide the hose onto the outlet at

the bottom of the sandblaster as

shown in Fig 7.

2. Tighten the clip shown to secure

the hose.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

Fig 4

Fig 5

Fig 6

Fig 7