Clarke CRT 40 사용자 지침 - 페이지 3
{카테고리_이름} Clarke CRT 40에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CRT 40 6 페이지. 40-piece rotary tool kit
Clarke CRT 40에 대해서도 마찬가지입니다: 사용자 지침 (13 페이지)
페이지 인쇄
PARTS DIAGRAM
10
Thank you for purchasing this CLARKE 40 piece Rotary Tool Kit
Please read this leaflet thoroughly and follow the instructions carefully, in doing so
you will ensure the safety of yourself and that of others around you, and you can
look forward to the tool giving you long and satisfactory service.
PACKAGE CONTENTS
The package contains:
1
Rotary Tool
1
Flexible Drive
1
Tool Stand Complete
1
Chuck spanner
40
Accessories/consumables
1
Case
SAFETY PRECAUTIONS
•
ALWAYS keep the power cable away from the moving parts of the rotary tool.
•
ALWAYS switch off the tool and allow to stop fully before putting to one side.
•
In the event of power failure or disconnection of supply for whatever reason,
when the tool is in operation...ALWAYS SWITCH OFF the tool before putting
down, then disconnect from the mains supply.
•
ALWAYS ensure the accessories used are rated to rotate at, AT LEAST the
maximum speed of the tool.
•
NEVER attach an assembly wrench to your rotary tool with a piece of string or
anything similar.
•
NEVER press the drive shaft locking button when the rotary tool is operating.
•
ALWAYS ensure that the mandrel diameter is the same as the collet diameter.
•
ALWAYS use a clamping device for securing the work piece. Keep your hands
away from the work piece.
•
ALWAYS wear safety goggles, manufactured to the latest European Safety
Standards. Everyday eyeglasses do not have impact resistant lenses, they are
not safety glasses.
•
NEVER force the tool, only light pressure is required to perform a task.
•
NEVER overtighten the screw when mounting a grinding disc or cutting disc
on to its mandrel.
•
NEVER allow children to operate this tool.
•
IF the tool begins to vibrate during operation, switch OFF immediately and
investigate the cause.
3