Clarke ECSS-1 조립 및 사용 설명서 - 페이지 10

{카테고리_이름} Clarke ECSS-1에 대한 조립 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke ECSS-1 16 페이지. Chainsaw sharpener

MAINTENANCE AND CLEANING

• Use a dry paint-brush to clean the unit and remove grinding

residues.

• Do not clean the unit with aggressive detergents or chemicals.

• The unit does not require any lubrication.

CHANGING THE GRINDING DISC

BEFORE CARRYING OUT ANY WORK ON THE CHAIN SAW SHARPENER

DISCONNECT THE PLUG FROM MAINS SUPPLY.

1. Unscrew the bolts indicated

using the hexagonal key

supplied and remove the

protective cover (D).

2. Use the wrench supplied to lock

the spindle and then loosen the

nut with the socket wrench.

3. Place the new grinding disc over

the spindle.

• Only use grinding discs with a

diameter of 100 mm.

• Replacement grinding disc

speed must meet or exceed

the RPM rating of the unit.

Note: Replacement discs are available from your Clarke dealer part

number (3402076)

4. Tighten the nut and mount the protective cover (D) on the unit.

See Fig 14.

Fig 14

Fig 15