Directed DIRECTECHS CHRYSLER10 설치 매뉴얼 - 페이지 10

{카테고리_이름} Directed DIRECTECHS CHRYSLER10에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed DIRECTECHS CHRYSLER10 19 페이지.

Key2GO

This feature is mandatory to control the immobilizer override in this firmware.

Key2GO has been designed and developed to bypass the advanced encryption layers found in modern vehicles. It uses an array

of servers to generate a duplicate of the original key, allowing the installation of a remote starter without having to give up a key.

The advantage is that this feature allows you to use one original key and the server to configure the bypass in the vehicle.

All Key2GO-compatible firmware are clearly indicated in the function list of each vehicle search result page and will also appear

on the flash page. Any first-time user must re-register to gain access to Key2GO, and some additional information will be required

to complete the registration process, such as your Directed account number and store name.

Key2GO is compatible with XKLoader2, the online web tool, and the DirectLink Mobile application.

Refer to "Module programming" on page 12 of this guide for instructions on how to program features using Key2GO.

Before connecting the Directed Digital Solutions, it is important to ensure that the proper feature and function programming is

selected using the configuration wizard. Visit www.directechs.com to use the latest version of the online tool.

Flashing a module using your computer:

1. Disconnect the main module from any (+) 12V power source, then connect it to your computer using the XKLoader2.

2. Go to www.directechs.com using Internet Explorer; the configuration wizard will be displayed automatically.

3. Follow the instructions in the pop up window that will be displayed when the module is detected.

Flashing a module using your smartphone or tablet:

1. Disconnect the main module from any (+) 12V power source, then connect it to the XKLoader3.

2. Launch the Directechs Mobile app on your smartphone or tablet.

3. Select FLASH YOUR MODULE and follow the on-screen instructions.

When the flashing operation is successful, you can proceed with the instructions below.

The yellow loop on the Directed Digital Solutions controls which transmission type the unit is configured for. The state of the loop

(uncut or cut) when the main module is powered up will determine which type is selected.

•

Uncut (default): Manual transmission.

•

Cut: Automatic transmission.

For safety reasons, all Directed Digital Solutions are shipped ready to use with a manual transmission (the yellow loop is

untouched). If the loop is cut after power has been applied, it is necessary to cycle power to the main module (via the white 12-

pin main power harness) so the unit will see the state change on the loop and appropriately configure the transmission type.

Ready mode

To successfully remote start a vehicle equipped with a manual transmission, the Ready Mode feature must be enabled before

exiting the vehicle. Please refer to the Owner's Guide for more details on this required process.

Directed Digital Solutions CHRYSLER10