Clarke PRO235 운영 및 유지 관리 지침 - 페이지 7

{카테고리_이름} Clarke PRO235에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke PRO235 9 페이지. 1/4” drive digital torque wrench

6. Re-set of the unit if you believe its capacity may have been exceeded.

7. Never use the wrench to undo bolts & nuts which may be excessively

tight. Very tight nuts and bolts should be loosened with a standard wrench

and the torque wrench used only for re-tightening.

8. Do not expose the wrench to extreme temperature, humidity or direct

sunlight for extended periods.

9. Avoid using knuckle or universal joints, as these could possibly result in

inaccurate torque settings.

STORAGE & CLEANING

1. Store in a clean, dry environment away from excess heat, humidity or dust.

2. If the wrench is not to be used for long periods of time it is advisable to

remove the batteries to avoid the risk of leaking.

3. Clean by wiping the tool and the display with a soft cloth. Never immerse

it in water or any type of solvent or cleaning fluid.

MAINTENANCE & CALIBRATION

The wrench has been calibrated at the factory order to ensure accurate

readings and should not require any re-calibration. The original calibration

certificate should be supplied.

If inaccuracy is suspected, contact your local Clarke dealer.

To maintain the accuracy of the wrench periodically reset by holding the

and

Do not attempt to dismantle the wrench.

BATTERY USE AND CARE

1. If when switching on, there is no reading on the display, or the 'Battery

Condition Indicator' on the panel is empty, the batteries must be

replaced.

2. Never combine used batteries with old ones or mix battery types.

3. Never use a battery if it is cracked or damaged.

4. Always dispose of old batteries appropriately. Never either dump or

incinerate old batteries.

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

buttons together.