Clarke PRO236 운영 및 유지 관리 지침 - 페이지 7

{카테고리_이름} Clarke PRO236에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke PRO236 12 페이지. Digital torque wrench

PREPARATION FOR USE

1. Open the cover of the battery

compartment by turning it anti-

clockwise & insert four AAA batteries

as shown. Close the compartment

cover and the wrench is ready to use.

TURNING THE WRENCH ON /OFF

1. Press the

• The unit will bleep and the complete

display screen will momentarily light up.

2. Press the

1. The display illumination can be turned on or off by pressing the

button.

When enabled, this setting means that the wrench will turn off automatically if

no buttons are pressed during a given time. Change the

follows:

1. Once the unit is powered up, press

Auto/Off time of

2. Press the

to turn off the Auto-Off function.

3. Press the

the measurement mode.

Note; If no buttons are touched for 3 seconds the wrench will return to

the measurement mode.

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

button to turn on.

button again to turn the system off.

(5 minutes) is shown on the display.

button to select the shut-off time of 5 or 15 minutes, or OFF

button to confirm the selection. The wrench will return to

three times and the default

Auto/Off

setting as