alduro BM-14 매뉴얼 - 페이지 4

{카테고리_이름} alduro BM-14에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. alduro BM-14 7 페이지.

Tool Change

Place a towel underneath the tool, then place the tool in the

collet and tighten it while holding it with one hand.

Aftwerwards tighten the tool holder with both hands. Make

sure the tool is inserted as far as possible.

Tools

Wood

Metal

Sinking

Tapping

Bigger holes

(max 300rpm)

(by hand)

Depending on your material you will need a special drill bit.

All metal drill bits can also be used on plastics.