ALE TC Series 운영자 매뉴얼 - 페이지 9

{카테고리_이름} ALE TC Series에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALE TC Series 18 페이지.

Fig. 9: S062 Square

Due to the risk of vibration, it is not recommended to fix the printer directly onto

the conveyor.

Install the controller and connect it to the print-head using the supplied data cable but

do not power on.

When the final position of the print-head along the conveyor is determined, the next

step is to "ink up" the TC print-head, as it is shipped dry (see next chapter).

2.1.3

Photocell installation

Install the supplied photocell close to, but before the print-head. This will detect the

product just before it passes the print-head nozzles (Fig. 11)

TC series print-heads Operator Manual

Design • Print • Trace

Fig. 10: Print-head mounting

07/07/2011