Clarke Strong-Arm CSA15F 운영 및 유지 관리 지침 - 페이지 7

{카테고리_이름} Clarke Strong-Arm CSA15F에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke Strong-Arm CSA15F 12 페이지. 15 tonne shop press

OPERATION

Using the Shop Press

Place workpiece onto the arbor

plates.

2. Align the workpiece beneath the

ram as required.

3. Close the release valve by

turning it clockwise until it is firmly

closed.

4. Insert the pump handle into

either the high pressure or low

pressure slots

5. Pump the handle slowly until the

ram is close to, or just touching,

the workpiece.

6. Pump the handle slowly to apply

pressure to the workpiece.

7. When work is done, stop

pumping the handle. Slowly and

carefully turn the release valve

anticlockwise to release pressure from the workpiece

Note: Always keep the ram retracted after use to avoid corrosion.

8. Once the ram has fully retracted, remove workpiece from work bed.

Fig. 7

Release Valve

Low pressure

High pressure