Zanussi ZBA32050SA 사용자 설명서 - 페이지 5
{카테고리_이름} Zanussi ZBA32050SA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZBA32050SA 25 페이지.
Zanussi ZBA32050SA에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 사용자 설명서 (13 페이지)
페이지 인쇄
Climate
Ambient temperature
class
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
Some functional problems might occur
for some types of models when
operating outside of that range. The
correct operation can only be
guaranteed within the specified
temperature range. If you have any
doubts regarding where to install the
appliance, please turn to the vendor,
to our customer service or to the
nearest Authorised Service Centre.
ELECTRICAL CONNECTION
•
Before plugging in, ensure that the voltage and
frequency shown on the rating plate correspond
to your domestic power supply.
•
The appliance must be earthed. The power
supply cable plug is provided with a contact for
this purpose. If the domestic power supply
OPERATION
CONTROL PANEL
SWITCHING ON
1. Insert the plug into the wall socket.
2. Touch the temperature regulator button if all
LED indicators are off.
1
2
4
3
socket is not earthed, connect the appliance to
a separate earth in compliance with current
regulations, consulting a qualified electrician.
•
The manufacturer declines all responsibility if
the above safety precautions are not observed.
•
This appliance complies with the E.E.C.
Directives.
VENTILATION REQUIREMENTS
The airflow behind the appliance must be sufficient.
min.
5 cm
200 cm
CAUTION! Refer to the assembly
instructions for the installation.
Temperature indicator LED
1
QuickChill indicator LED
2
QuickChill button
3
Temperature regulator
4
ON/OFF button
SWITCHING OFF
Keep touching the temperature regulator button for
3 seconds.
All indicators light off.
2
min.
2
200 cm
5