Zanussi ZBB2244 사용자 설명서 - 페이지 12
{카테고리_이름} Zanussi ZBB2244에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZBB2244 16 페이지. Fridge-freezer
페이지 인쇄
G
H
7
Connect the appliance
laterally to the kitchen fur-
niture sidewall:
1.
Loosen the screws of
the part (G) and
move the part (G) till
the furniture side-
wall.
2.
Tighten the screws of
the part (G) again.
3.
Attach the part (H) to
the part (G).
~50 mm
o
90
21 mm
o
90
~50 mm
21 mm
9
Install the part (Ha) on
the inner side of the kitch-
en furniture.
12
Ha
Hb
Hc
Hd
8
Disconnect the parts
(Ha), (Hb), (Hc) and (Hd).
Ha
Hc
10
Push the part (Hc) on
the part (Ha).
8 mm
Hb
Ha
11
Open the appliance
door and the kitchen furni-
ture door at an angle of
90°.
Insert the small square
(Hb) into guide (Ha).
Put together the appliance
door and the furniture
door and mark the holes.
Hb
13
Place the small square
on the guide again and fix
it with the screws sup-
plied.
Align the kitchen furniture
door and the appliance
door by adjusting the part
Hb.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic sealing strip is attached tightly to the
cabinet.
Important! If the ambient temperature is low (for example,
in the Winter), the size of the gasket decreases. The size of
the gasket increases when the ambient temperature
increases.
8 mm
K
Ha
12
Remove the brackets
and mark a distance of 8
mm from the outer edge of
the door where the nail
must be fitted (K).
Hb
Hd
14
Press the part (Hd) on
the part (Hb).