Zanussi ZBB27640SV 사용자 설명서 - 페이지 6
{카테고리_이름} Zanussi ZBB27640SV에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZBB27640SV 17 페이지.
페이지 인쇄
OPERATION
CONTROL PANEL
SWITCHING ON
1. Insert the plug into the wall socket.
2. Touch the temperature regulator button if all
LED indicators are off.
SWITCHING OFF
Keep touching the temperature regulator button for
3 seconds.
All indicators light off.
TEMPERATURE REGULATION
To operate the appliance, touch the temperature
regulator until the LED corresponding to the
required temperature lights up. Selection is
progressive, varying from 2°C to 8°C.
Coldest setting: +2°C.
Warmest setting: +8°C.
A medium setting is generally the most
suitable.
Choose the setting keeping in mind that the
temperature inside the appliance depends on:
DAILY USE
WARNING! Refer to Safety chapters.
CLEANING THE INTERIOR
Before using the appliance for the first time, the
interior and all internal accessories should be
6
1
2
4
3
Temperature indicator LED
1
QuickFreeze indicator LED
2
QuickFreeze button
3
Temperature regulator
4
ON/OFF button
•
room temperature
•
frequency of opening the door
•
quantity of food stored
•
appliance location.
1. Touch temperature regulator.
Current temperature indicator blinks. Any time you
touch the temperature regulator, the setting moves
by one position. The corresponding LED blinks for
a while.
2. Touch the temperature regulator until the
required temperature is selected.
QUICKFREEZE FUNCTION
You can activate QuickFreeze function by pressing
the QuickFreeze button.
The LED corresponding to the QuickFreeze
indicator lights up.
You can deactivate QuickFreeze function by
pressing the QuickFreeze button again.
The QuickFreeze indicator will light off.
This function stops automatically after
52 hours.
washed with lukewarm water and some neutral
soap to remove the typical smell of a brand-new
product, then dried thoroughly.
CAUTION! Do not use detergents,
abrasive powders, chlorine or oil-
based cleaners as they will damage
the finish.