Zanussi ZBB28440SA 사용자 설명서 - 페이지 12
{카테고리_이름} Zanussi ZBB28440SA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZBB28440SA 16 페이지.
페이지 인쇄
4mm
44mm
3
Adjust the appliance in
the niche.
Make sure that the dis-
tance between the appli-
ance and the cupboard
front-edge is 44 mm.
The lower hinge cover (in
the accessories bag)
makes sure that the dis-
tance between the appli-
ance and the kitchen furni-
ture is correct.
Make sure that the clear-
ance between the appli-
ance and the cupboard is
4 mm.
Open the door. Put the
lower hinge cover in posi-
tion.
5
Remove the correct
part from the hinge cover
(E). Make sure to remove
the part DX, in the case of
right hinge, SX in opposite
case.
12
I
I
4
Attach the appliance to
the niche with 4 screws.
C
D
E
E
B
6
Attach the covers (C,
D) to the lugs and the
hinge holes.
Install the vent grille (B).
Attach the hinge covers (E)
to the hinge.
G H
7
Connect the appliance
laterally to the kitchen fur-
niture sidewall:
1.
Loosen the screws of
the part (G) and
move the part (G) till
the furniture side-
wall.
2.
Tighten the screws of
the part (G) again.
3.
Attach the part (H) to
the part (G).
~50 mm
o
90
21 mm
o
90
~50 mm
21 mm
9
Install the part (Ha) on
the inner side of the kitch-
en furniture.
Ha
Hb
Hc
Hd
8
Disconnect the parts
(Ha), (Hb), (Hc) and (Hd).
Ha
Hc
10
Push the part (Hc) on
the part (Ha).
www.zanussi.com