Zanussi ZBB28460SA 사용자 설명서 - 페이지 13

{카테고리_이름} Zanussi ZBB28460SA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZBB28460SA 32 페이지.
Zanussi ZBB28460SA에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지)

페이지 인쇄

Remove the correct

part from the hinge

cover (E). Make sure

to remove the part

DX, in the case of

right hinge, SX in op-

posite case.

~50 mm

21 mm

~50 mm

21 mm

Install the part (Ha) on

the inner side of the

kitchen furniture.

www.zanussi.com

Attach the covers (C,

D) to the lugs and the

hinge holes.

Install the vent grille

(B).

Attach the hinge cov-

ers (E) to the hinge.

Push the part (Hc) on

the part (Ha).

G H

Connect the appli-

ance laterally to the

kitchen furniture side-

wall:

1. Loosen the

screws of the

part (G) and

move the part (G)

till the furniture

sidewall.

2. Tighten the

screws of the

part (G) again.

3. Attach the part

(H) to the part

(G).

8 mm

Open the appliance

door and the kitchen

furniture door at an

angle of 90°.

Insert the small

square (Hb) into

guide (Ha).

Put together the ap-

pliance door and the

furniture door and

mark the holes.

Disconnect the parts

(Ha), (Hb), (Hc) and

(Hd).

8 mm

Remove the brackets

and mark a distance

of 8 mm from the out-

er edge of the door

where the nail must

be fitted (K).