Zanussi ZBB28650SA 사용자 설명서 - 페이지 9
{카테고리_이름} Zanussi ZBB28650SA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZBB28650SA 16 페이지. Fridge-freezer zbb28650sa
페이지 인쇄
Replacing the lamp
1
Disconnect the mains plug from the mains socket.
2
Press on the rear hook and at the same time slide the
lamp cover in the direction of the arrow.
3
Replace the lamp with one of the same power and
specifically designed for household appliances. (the max-
imum power is shown on the light lamp cover)
4
Install the lamp cover by sliding it into its original po-
sition.
5
Connect the mains plug to the mains socket.
6
Open the door. Make sure that the lamp comes on.
Closing the door
1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer to "Installation".
Technical data
Dimension of the recess
Rising Time
Voltage
Frequency
The technical information are situated in the rating plate
on the internal left side of the appliance and in the energy
label.
Installation
Caution! Read the "Safety Information" carefully for
your safety and correct operation of the appliance
before installing the appliance.
Positioning
Install this appliance at a location where the ambient tem-
perature corresponds to the climate class indicated on the
rating plate of the appliance:
www.zanussi.com
1
3.
Height
Width
Depth
Climate
SN
N
ST
T
2
If necessary, replace the defective door gaskets.
Contact the Service Center.
1780 mm
560 mm
550 mm
21 h
230-240 V
50 Hz
Ambient temperature
class
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
9