Zanussi ZBB28651SA 사용자 설명서 - 페이지 8

{카테고리_이름} Zanussi ZBB28651SA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZBB28651SA 16 페이지. Refrigerator zanussi zbb28651sa
Zanussi ZBB28651SA에 대해서도 마찬가지입니다: 사용자 설명서 (48 페이지)

페이지 인쇄

Problem

The temperature in the ap-

pliance is too high.

Replacing the lamp

The appliance is equipped with a longlife LED

interior light.

Only service is allowed to replace the lighting

device. Contact your Service Center.

Closing the door

1. Clean the door gaskets.

Installation

Caution! Read the "Safety Information"

carefully for your safety and correct

operation of the appliance before installing the

appliance.

Positioning

Install this appliance at a location where the

ambient temperature corresponds to the cli-

mate class indicated on the rating plate of the

appliance:

Climate

Ambient temperature

class

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C

Electrical Connection

Caution! Any electrical work required to

install this appliance should be carried

out by a qualified electrician or competent

person.

Warning! This appliance must be

earthed.

The manufacturer declines any liability should

these safety measures not be observed.

Possible cause

The temperature regulator is not

set correctly.

Set a lower temperature.

2. If necessary, adjust the door. Refer to "In-

stallation".

3. If necessary, replace the defective door

gaskets. Contact the Service Center.

Important! The wires in the mains lead are

coloured in accordance with the following

code:

A Green and Yellow:

C Brown:

D Blue:

As the colours of the wires in the mains lead of

this appliance may not correspond with the

coloured markings identifying the terminals in

your plug, proceed as follows:

1. Connect the wire coloured green and yel-

low to the terminal marked either with the

Solution

Earth

Live

Neutral