Zanussi ZBT23420SA 사용자 설명서 - 페이지 13
{카테고리_이름} Zanussi ZBT23420SA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZBT23420SA 16 페이지.
Zanussi ZBT23420SA에 대해서도 마찬가지입니다: 사용자 설명서 (28 페이지), 사용자 설명서 (48 페이지)
페이지 인쇄
C
D
E
E
B
10. Install the vent grille (B).
11. Attach the hinge covers (E) to the hinge.
12. Connect the appliance laterally to the
kitchen furniture sidewall:
a. Loosen the screws of the part (G) and
move the part (G) till the furniture
sidewall.
b. Tighten the screws of the part (G)
again.
c. Attach the part (H) to the part (G).
G H
13. Disconnect the parts (Ha), (Hb), (Hc) and
(Hd).
Ha
Hb
Hc
Hd
a. Install the part (Ha) on the inner side of
the kitchen furniture.
~50 mm
o
90
21 mm
o
90
~50 mm
21 mm
b. Push the part (Hc) on the part (Ha).
www.zanussi.com
Ha
Hc
14. Open the appliance door and the kitchen
furniture door at an angle of 90°.
a. Insert the small square (Hb) into guide
(Ha).
8 mm
Hb
Ha
b. Put together the appliance door and the
furniture door and mark the holes.
15. Remove the brackets and mark a distance
of 8 mm from the outer edge of the door
where the nail must be fitted (K).
8 mm
K
Ha
16. Place the small square on the guide again
and fix it with the screws supplied.
17. Align the kitchen furniture door and the
appliance door by adjusting the part Hb.
Hb
18. Press the part (Hd) on the part (Hb).
13